WHAT ARE THE PRECAUTIONS TO TAKE TO GET STARTED IN THE REBUILDABLE?

Sooner or later, vapers are interested in rebuildable. But this oh-so-exciting universe can be relatively intimidating at first. Rest assured, we are here to help you and guide you throughout this exciting discovery! Ultimately very accessible, but the rebuildable still requires taking some precautions. Making a coil is not an insurmountable obstacle, but if the safety rules are not respected, an accident can quickly happen… It would be a shame to damage your pretty body envelope with the vape which is a way to preserve it!

THE NEED TO KNOW THE VALUE OF ITS RESISTANCE

To put aside any danger, it is imperative to carry out its assemblies on an ohmmeter or an electronic box. These two devices are equipped with multiple safeties and will thus be able to inform you if a short circuit or any other problem is present. Imagine that the assembly is carried out on a mechanical mod and therefore devoid of security. 

STABILIZE YOUR COIL

Also, check that the studs of your atomizer are well screwed and that the contact with your resistive wire is optimal. Above all, cut it flush so that it does not come into contact with your top cap: it is a guaranteed short-circuit!

Another very important point is to properly stabilize your coil. This step simply consists of heating your coil, without cotton of course, so that it blushes slightly. When this is the case, you can tighten your coil using a ceramic head clamp to have homogeneous heating. The coil must heat from the inside out. Without this manipulation, you could have a hot spot and therefore subsequently a rather painful dry hit… But above all, do not tighten the coils with metal pliers during heating! Electricity and metal are often synonymous with a short circuit. So do not hesitate to equip yourself with a ceramic clamp which has a very high insulating power.

THE IMPORTANCE OF CHOOSING THE RIGHT BATTERIES

Your coil is now made and stabilized, you can put the cotton in it and mount it on your device. The ohm value is stable, you can play it safe and be satisfied with an electronic box or switch to a mechanical mod. But if you make this choice, it means that you have a minimum of knowledge in terms of rebuildable and of course that you have opted for batteries worthy of the name.

Forget the batteries of mysterious brands and prefer reputable brands like Sony, Samsung, LG, iJoy or Ampking and check the discharge current. The lower your resistance, the more important, even vital, it will be to have a high amperage. If you omit this detail on an electronic box, the safeties will engage and you can avoid the worst, but on a mechanical mod… You can only count on your reflexes to avoid a tragedy!

Don’t be put off by all the recommendations above. Your safety is at stake, so don’t skimp on the means, take the time to do things right. But the game is worth the candle!